24W LED T8 Tube

SMD T-Tube Fluorescent 24W, 1.2M, CE certified, Patent 200920302425-1.2 Eyes Protect LED energy conservation illuminates Aplications Office Conference Room School Museum Hospital Bank Airport Factory Business Area Features Use PLCC SMD White LED Low electromagnetic radiation wave. Luminescence without heat radiation. Do not contain mercury, protecting the environment. No flicker phenomenon, not to hurt the eyes. No UV light and infrared light, harmless to human body. Fine glare control. Life long 20000hrs up. Super good uniformity and luminous efficiency. Lighter weight and thin, Own design, Power-efficient, easy to install. Specifications: Spec Equal to traditional 40W unit Power Consumption 24+2 W Current Consumption 400 mA Power Factor >0.9 Power Efficiency >85 % Weight 410 g Input Voltage 85-275 V Lumens White 900, Warm White800 lm Viewing angel 120 Degree LED Tube Life 10000(One Year) Hr. LED Life 50000 Hr. Connector G13 Dimension Whole length 1210 mm Tube length 1198 mm TubeDia. 28.5 mm Color Temperature 3500(LFL-10044)&6500(LFL-10041) K Material PC Light side AL Main part PC Terminator side Storage temperature -30 +70 C Temperature range -30 +60 C Reliability Test Item Test Project Testing standards Test Time 1 Dry-based lighting Input rated frequency at the input terminals of the rated voltage 1000hrs 2 Temperature cycling test 50C / 16hrs ,-5C/16hrs 10Times 3 Durability Test 50C 360hrs 4 On & Off test point On/30s,Off/30s 8000Times 5 Eliminate moisture-point test 40C,95%RH On/30Minutes,Off/150minutes 160Times 6 Vibration Test X,Y,Z ways, 12 minutes per axis , According to the frequency 300-1200 / min , 3 minutes per cycle , All amplitudes 2mm 36minutes Note This product is designed for built-in transformer system, Therefore, can be covered by all the common market AC power. This product can be used in humid environments, But not directly into water or water spraying This product in the AC Power start Transformer system ,the Capacitor charge state, Therefore, delay 2 seconds to start as a normal phenomenon. When open the packaged product should be carefully check whether there are broken lamp shell,Do not light up any damaged LED light, And returned to dealers to take the necessary repair or replacement. EMERGENCY condition handling Does not start normally 1) Please confirm whether there is loose input power, If does not start normally, please immediately notify the professional assistance to deal with Smoke, smell, flickering or different sounds 2) Immediately turn off AC power, promptly notify the professional staff to help deal with.